Technical Specifications


Head Dia.
3.7 inches (93 mm)
Grip Dia.
1.2 inches (30 mm)
7.6 inches (192 mm)
1.6 pounds (710 grams)1

Power method

Operational voltage

  • 10V - 24V

What's included

  • ZP10L9C flashlight
  • Spare o-rings
  • User Manual
  • Cable secure cap
  • Two models available (see below)

Two models

  • Car charger edition
    • Includes everything listed in "what's included" section, plus:
    • Car charger (Coil cord cable)
      • Idle cable length: 2 feet/0.6 meter
      • Fully extended cable length:
        11.5 feet/3.5 meter
      • Fuse protected
      • High current copper wire with heavy duty PU insulator
      • RED LED connection indicator
      • Waterproof connectors
      • Custom-made car charger metal parts for better conductivity
  • Battery pack edition
    • Includes everything listed in "what's included" section, plus:
    • 11.1V 7800mAh Battery Pack (9x18650)
      • Uses nine sorted and balanced 18650 li-ion 2600mAh batteries
      • Installed permanently inside a durable EVA molded nylon carrying holster
      • Safety circuit protected against short circuit, over-discharge, or over-charge
    • Battery extension cord (coiled cord)
      • Idle cable length: 1 feet/0.3 meter
      • Fully extended cable length:
        4 feet/1.2 meter
      • High current copper wire with PU insulator
      • Waterproof connectors
    • 11.1V battery charger
      • Includes UL listed 15V 1.6A charger (100V-240V)
      • Uses standard constant current / constant voltage charging method
      • Uses DC-DC switch charging controller for highly efficient operation
      • Built-in ten hours safety time
      • Blue (standby) and Red (charging) LED indicator
      • Anodized aluminum housing


  • 4 * CREE XM-L2 Cool White U2 LED
  • 4 * CREE XP-L HI Cool White V3 LED
  • 4 * CREE XM-L2 Neutral White T6 LED

Max output

    • LED lumen: 5200
    • ANSI FL-14 lumen: 4500
    • LED lumen: 5120
    • ANSI FL-14 lumen: 4310
    • LED lumen: 4835
    • ANSI FL-14 lumen: 3740

Beam Profile

    • Center lux: 103,700 lux
    • Center spot angle: 7°
    • Spill light angle: 48°
    • Beam distance: 705 yards / 644 meters

    • Center lux: 193,100 lux
    • Center spot angle: 4.6°
    • Spill light angle: 50°
    • Beam distance: 958 yards / 879 meters


  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)

LED circuit

  • C7500 HV
    • Wide voltage input range
    • 53-Watt output
    • Low internal resistance design offers up to 93% efficiency7
    • Non-dimming constant current regulation for all output levels
    • Negligible uA standby current
    • Energy saving feature5
    • High voltage mode to reduce output above 18V input
    • Dual color LED voltage report system
    • TVS diode protected against voltage spikes


  • Smooth aluminum reflector


  • HAIII hard anodization aerospace aluminum

Carrying method

  • Para-cord lanyard with quick attachment clip


  • IPX-8 standard

Replaceable items

  • Lens

Output and Runtime

  • Five brightness levels
    • Led lumen: 52005/3180/1640/420/15
    • ANSI FL-1 lumen: 45005/2765/1430/365/13
    • Runtime (Battery Kit):
    • 2/3.5/7.5/32/800 hours (9x18650)
  • Neutral white T6 LED offers about 7% less lumen output than the U2 LED.
  • Hidden auxiliary output:
    • S.O.S.


  • Turn on the light at maximum output (constant on) by pressing and holding the on/off switch button
  • Turn on the light at its lowest output (constant on) by pressing and release the switch button within 0.3 second
  • To switch between output levels, (with light turned on) press and hold the on/off switch for longer than 0.6 second to switch to next output. Press and hold the switch will cycle between all levels.
  • To access hidden S.O.S. mode, (with light turned on) press and hold the on/off switch for more than 10 seconds to enter

  • LED voltage indicator
    • Blue (higher than 10.8V)
    • Red (between 9.8V and 10.8V)
    • Flashlight Red (lower than 9.8V)
  • Energy Saving feature
    • Reduces output by 10% after 200 seconds at turbo mode.
  • High voltage mode
    • For optimal circuitry temperature operating at higher voltage, when initial startup voltage exceeds 18V, the maximum output will be reduced by 25%, and energy saving percentage will be changed to 25%.


Other features

  • LED direct soldering on copper for maximum heatsink ability
  • User replaceable glass lens


Battery Safety Precaution

Ensure the protective circuit on the 18650 batteries has current limitation of higher than 5A. Always use proven Sportac batteries for best performance and reliability.

All Sportac flashlights are designed to use button-top battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only Sportac li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries.     Back to top

Flashlight Maintenance

Periodically clean the threads and o-rings with a lint free cloth and apply a thin coating of Sportac synthetic grease to the o-rings and threads. After prolonged exposure to moisture, the head and batteries should be removed, inspected, and dried. Do not touch or attempt to clean the reflector, as it will scratch the reflective coating permanently.     Back to top

  1. This weight measurement does not includes batteries. This is ZP10L9C Base.
  2. All batteries must have protruding top button.
  3. Beam output diameter taken at one meter
  4. ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. Sportac’s ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight. For O.T.F. lumen, measurement is taken one minute after turning on the flashlight.
  5. Energy saving feature reduce the maximum output current from 100% to 75% (programmable at 75% or at 90%) after 200 seconds at turbo output.
  6. Turbo output runtime is measured with energy saving feature enabled using three Sportac 3400mAh batteries.
  7. Maximum efficiency occurs when input voltage is very close to LED forward voltage.