D25M Ti

Top binned CREE XP-G S2 LED

2.7-6V input voltage, Two brightness levels, Brass construction.
High performance P60 LED drop-ins (for SF & 18650 host)

Two levels Sportac P60 dropin

This newly updated P60 dropin now features high and low brightness output! Different and superior than the rest of the P60 dropins. The Sportac P60 dropin uses all brass construction for maximum heatsink capability. The unique design allows the dropin to be directly in touch with the flashlight body for quick heat trandser, thus allowing LED to be driven harder and running brighter. Featuring state-of-art C3000LV DS LED driver and latest LED technology, Sportac is simply the best P60 dropin ever made.

C3000LV DS LED driver

C3000 DS isn't just about dual brightness levels. It also features new 1MHz fast switching buck circle that allows ultra low dropout voltage (less than 0.2V) for longer current regulation runtime using single 18650 battery. The low internal resistance design offers up to circuitry efficiency when input voltage is near the LED forward voltage. To prolong runtime, the circuitry features energy saving feature which will step down the lumen output by 10% at high output after 200 seconds.

How to use?

Insert drop-in to your SF host, or install it with spacer when installing to a 18650 body host. It's normal to leave a small gap between the head and body as the drop-in is heatsink directly with the body. To toggle brightness levels, simply switch the flashlight off and on after turning the flashlight on. The micro-processor in the circuitry memories the last output you have turned on for more than one second.

CREE XP-L HI V3, XM-L2 U4, XP-G2 S3,
365/395nm UV, or Nichia 219C CRI-92 LED.

We offer the highest and latest bin available LED for maximum brightness. XM-L2/XP-L HI gives more beam distance while the triple XP-G2 offers maximum lumen. The new Nichia 219C 4500K neutral white LED boosts CRI to 92 for best color beam.

What's special?

  • Two brightness output new
  • Includes spacer ring to fit 18650 P60 flashlight body new
  • Energy saving feature new
  • Input voltage: 2.7-6V new
  • Brass Heatsink
  • Deep aluminum reflector design with smooth reflective coating
  • Reversed polarity protection
  • Built-in brass spring for recoil
  • Wide input voltage
  • Available with cool white or netural white LEDs
  • Product weight: 1.1oz (single LED) 1.3oz (triple LEDs)

Single Led Two Levels P60 Dropin  Product pics | std

Optimized for far projecting beam.
CREE XM-L2 U2 Cool White LED or XP-L HI V3.

  • 1280/1100 LED lumen (XM-L2 U2 C.W./XP-L HI V3 LED)
  • 1020/880 ANSI FL-1 lumen (XM-L2 U2 C.W./XP-L HI V3 LED)
  • Brightness levels: 100% and 20%
  • Runtime: 1.6/10hrs (2xCR123A) | 0.8/6hrs (1x18650)
  • Voltage input: 2.7V - 6V new
  • For 6P, 6Z, C2, M2, G2, or other CR123A aluminum P60 body (an optional fitting ring is needed when used with shock absorbing head (ie. M2))
  • 15,100/26,500 lux @ 1 meter, beam distance 268/355 yards for XM-L2/XP-L HI LED

Installation: Remove batteries and flashlight head (use included spacer with 18650 host), then replace the P60 module inside. Attach the flashlight head and ensure it's tighten snugly for proper contact.
Disclaimer: SureFire, LLC is not associated in any way with SPORTAC. All other trademarks not owned by SPORTAC are the property of their respective owners.

Triple LED Two Levels P60 Dropin Beam Shot & Product pics | std

For maximum lumen output. Floody beam. 3xCREE XP-G2 S3 Cool White LED or 3xNichia 219C D240 CRI-92 R9050 4500K LED.

  • 1310/1000 LED lumen (3*XP-G2 S3/3*Nichia 219C CRI92 LED)
  • 990/780 ANSI FL-1 lumen (3*XP-G2 S3/3*Nichia 219C CRI92)
  • Brightness levels: 100% and 20%
  • Runtime: 1.6/10hrs (2xCR123A) | 0.8/6hrs (1x18650)
  • Voltage input: 2.7V - 6V new
  • For 6P, 6Z, C2, M2, G2, or other CR123A aluminum P60 body (an optional fitting ring is needed when used with shock absorbing head (ie. M2))
  • 4,800 center lux @ 1 meter, beam distance 152 yards, spot angle 18° with spill angle 90°(3*XP-G2 S3)
  • 2,500 center lux @ 1 meter, beam distance 110 yards, spot angle 18° with spill angle 90°(3*Nichia 219C)

Installation: Remove batteries and flashlight head (use included spacer with 18650 host), then replace the P60 module inside. Attach the flashlight head and ensure it's tighten snugly for proper contact.
Disclaimer: SureFire, LLC is not associated in any way with SPORTAC. All other trademarks not owned by SPORTAC are the property of their respective owners.